——Easy way to free your hand.
Hi,guys.Friends who have installed shower rooms know that when the shower room installation is almost completed, it needs to be sealed with a shower door seal. However, the installation instructions for this shower door seal can be said easy and also can be said difficult. People who don’t know how to install it themselves often make mistakes. So today I will introduce the installation method of the shower room seal.
Preparation
When installing, you first need to prepare the corresponding installation tools. Without tools, it is impossible to install it.
The tools you need to prepare are:
- New shower screen seal (choose the appropriate shower door seal according to the type of bathroom door)
- Hard scraper or knife
- Cleaning agent and rag
- Protective gloves
- Measuring tools (such as tape measure)
Replacement steps
Measure and purchase:
Measure the length of the original shower door seal, record the size, and then purchase the corresponding replacement shower door seal.
Remove the old bathroom seal:
If the old bathroom seal is glued, use a hard scraper to pry it up carefully. Try not to damage the surrounding surface.
Clean the glass surface
Use a cleaner to thoroughly clean the glass surface and edges, wipe dry with a rag, and make sure there is no residual glue, dirt and mold. Install the new shower door seal:
Cut the shower glass seal according to the height. According to the instructions or the manufacturer’s recommendations, if you are using a shower glass seal that does not require glue, just snap the shower door seal into the glass. If it is a glued type, make sure the shower glass seal is firmly fixed. Make sure the end of the shower glass seals are aligned and there are no obvious gaps.
Check and test:
After installation, check the integrity of the shower door seal to ensure that there are no loose or uneven areas. If conditions permit, you can observe whether there is water leakage or looseness after using the shower to ensure good sealing.
The installation method of the shower door seal strip is very simple, and it mainly depends on whether the operator is skilled enough. The error rate is still quite low. Therefore, in addition to learning how to install the shower room seal, it is also a must to be familiar with the material of the seal.
Precautions
When choosing a new shower door seal strip, make sure that its material, size and thickness are suitable for the original position.
Consider using our special shower door seal strip, which can achieve the effect of suitable size, no yellowing, and not easy to break.
Check the status of the glass shower door seals and see the usage status. If it is yellow or moldy, please replace it in time to maintain the dryness and cleanliness of the bathroom.
After completing these steps, your glass shower door seal will be brand new, effectively preventing noise and water leakage!
Our Poduct Specification
Product name：Door Seal Shower/Shower Door Seal/Framed Shower Door Seal Strips/Shower Door Bottom Gasket/Shower Door Bottom Seal
Product model：H-type, U-type, F-type, special-shaped, 180 degrees with magnetism, 135 degrees with magnetism, 90 degrees with magnetism.
Product material：PVC；PC.
Color:Transparent, Black, Rose gold, Champagne gold.
Product Performance; Sealing effect of glass doors and windows.
Application Scenarios; Frameless glass doors and windows, Shower room doors, Fish tanks, Glass sliding doors, Glass sliding doors.
Product Characteristics; cold-resistant and frost-resistant, long service life, aging resistance.
Product advantages;
1. Translucent material:plays an anti-slip role to reduce the sound of collision with the door, increase service life.
2. Tough and soft, visible effect; elastic and tough, good anti-aging performance.
Welcome to ask and purchase.
